BEA FALCON XL User Manual download pdf

75.5351.02 EN 20080317 (75.5350) Page 1 of 7

FALCON & FALCON XL

USER'S GUIDE

MOTION SENSORS FOR INDUSTRIAL DOORS

• FALCON: for high mounting • FALCON XL: for low mounting

Technology: Microwave and microprocessor

Transmitter frequency: 24.125 GHz

Transmitter radiated power: <20 dBm EIRP

Transmitter power density: < 5 mW/cm²

Mounting height

FALCON: from 11.5 to 23’

FALCON XL: from 6.5 to 11.5’

Tilt angle: 0° to 180° in elevation

Detection zone (typical)

Wide pattern (FALCON XL): 13’ (W) x 6.5’ (D)

for a mounting height of 8.2’

Narrow pattern (FALCON): 13’ (W) x 16’ (D)

for a mounting height of 16’

Detection mode: movement

Minimum detection speed: 2.2 in/s (measured in the

sensor axis)

Supply voltage: 12V to 24V AC +/- 10%

12V to 24V DC +30% / -10%

Mains frequency: 50 to 60 Hz

Power consumption: < 2W

Output relay: free of potential changeover contact

Max contact voltage : 42V AC/ DC

Max contact current: 1A (resistive)

Max switching power: 30W (DC) / 60 VA (AC)

Hold time: 0.5s to 9s (adjustable)

Manual adjustment:

• orientation of sensing field (mechanically)

• multiple functions (by push buttons).

Remote control adjustments:

• Sensitivity.

• Hold time.

• Detection mode.

• Pedestrian and parallel traffic rejection mode.

• Relay configuration.

Temperature range : -22°F to 122°F (-30°C to +60°C)

Degree of protection: IP65

Product conformity:

R&TTE 1999/5/EC

EMC 89/336/EEC

Dimensions : 5 in (D) x 4 in (W) x 3 ¾ (H)

(127mm (D) x 102 mm (W) x 96mm (H))

Weight: 0.88 lbs (400 g)

Housing Material: ABS and Polycarbonate

Bracket Material: black anodized aluminum

Cable length: 33 ft (10 m)

Cable diameter: 1/8” (3 mm) (minimum)

1/4” (6.5 mm) (maximum)

The sensor must be firmly

fastened in order not to

vibrate.

The sensor must not be

placed directly behind a

panel or any kind of

material.

The sensor must not

have any object likely to

move or vibrate in its

sensing field.

The sensor must not

have any fluorescent

lighting in its sensing

field.

DESCRIPTION OF

THE SENSOR

INSTALLATION

TIPS

TECHNICAL

SPECIFICATIONS

1 2 3 4 5 6 7

Summary of Contents

Page 1 - FALCON & FALCON XL

75.5351.02 EN 20080317 (75.5350) Page 1 of 7 FALCON & FALCON XL USER'S GUIDE MOTION SENSORS FOR INDUSTRIAL DOORS • FALCON: for hi

Page 2 - 6.25 in

75.5351.02 EN 20080317 (75.5350) Page 2 of 7 To remove or to insert the cable: • Unscrew the retaining nut; • Pass the cable through the gro

Page 3

75.5351.02 EN 20080317 (75.5350) Page 3 of 7 FALCON (Mounting height: 16.5 feet) The sensing fields here on the right correspond

Page 4 - 0-9 0-9 0-9 0-9

75.5351.02 EN 20080317 (75.5350) Page 4 of 7 1. DESCRIPTION OF THE INFRARED REMOTE CONTROL • Open the battery compartment at the

Page 5

75.5351.02 EN 20080317 (75.5350) Page 5 of 7 During an adjustment session each parameter may be checked or changed at any time in the followin

Page 6 - WITH PUSH

75.5351.02 EN 20080317 (75.5350) Page 6 of 7 DETECTION MODE Press the DETECTION MODE key (7). Use the NUMBER Keys 1-3 (1) to select th

Page 7

75.5351.02 EN 20080317 (75.5350) Page 7 of 7 During the manual adjustment session: • Each press on the right button increases the number of

Comments to this Manuals

No comments

BEA FALCON XL User Manual

Browse online or download User Manual for Remote controls BEA FALCON XL. BEA FALCON XL User's Manual

Summary of Contents

Comments to this Manuals